|
Passive Fire Protection - Fire Collars, Penetrations and Joint Sealing - Occupational
Important Note:
You should visit the following web pages for information on how to apply for this licence class and the different licence grades available:
Fire Occupational Licensing
|
Licence Class
Certify, install and maintain
Scope of work
Certify, install and maintain— fire collars, fire rated penetrations and fire rated joint sealing.
Technical qualifications
Successful completion of —
a. both of the following—
(i) Certificate II in Asset Maintenance (Fire Protection Equipment) PRM 20406 including the successful completion of the following competencies —
• Identify Passive Fire and Smoke Containment Products and Systems PRMPFES36A; and
• Inspect and Test Passive Fire and Smoke Containment Products and Systems PRMFES39A; and
(ii) Prepare a Fire Protection Certification Statement or Report REP 1; or
b. successful completion of a course the authority considers is at least equivalent to a course mentioned in paragraph a;
DEFINITIONS
Certify means
(a) to give advice or a report, including a certificate, stating that a fire protection system complies with Australian and international standards, Building Code of Australia requirements and manufacturer’s specifications after conducting a survey of the system; and
(b) to give a QBSA licensee certificate under the Building Regulation 2006 for the work.
Inspect and test means
(a) to inspect by visual examination the components of fire protection systems or equipment to establish correct settings, physical condition or fitness for purpose under 1-5-5, AS 1851-2005; and
(b)to test, after inspecting, by the confirmation of correct function or performance of a component or system under 1-5-13, AS1851-2005.
Notes:
(1) REP 1 is a competency unit from Certificate IV in Fire Systems Compliance 30536QLD
Refer to Queensland Building Services Authority Regulation 2003
Schedule 2A - Part 2
| 1st Introduced |
01/01/09 |
|
|
|
|
|
| Scope Amendment |
06/11/09 |
|
|
|
|
|
| Technical Amendment |
06/11/09 |
|
|
|
|
|
 Click here to open a PDF version of the scope of work
|
Important Note:
Interstate Applicants - may be eligible to obtain a BSA licence through Mutual Recognition. The website page Interstate (Mutual Recognition) provides further information.
Overseas Applicants - may have to have an overseas qualification assessed for equivalency prior to applying. The website page Overseas Applicants provides further information. |
Technical Qualifications and Recognition of Prior Learning (RPL)
A formal technical qualification could consist of any of the following:
A completed apprenticeship
Successful completion of the appropriate course for this licence class
Successful completion of an equivalent course for the class of licence (e.g. similar modules)
A recognition certificate
A qualification of statement of attainment of the required competency issued by an approved authority for the class of licence
These types of qualifications are issued by Registered Training Organisations to persons who have successfuly completed their training.
If you do not hold a formal technical qualification you may be able to obtain this by undergoing RPL. RPL is provided by Registered Training Organisations (listed below). BSA's web page Recognition of Prior Learning provides more information about this process.
Registered Training Organisations:
Certify or Certify, Install, Maintain
Please note that the Registered Training Organisations (RTOs) listed are provided as a guide only and can be subject to change at any time. The BSA does however strive to ensure that the information contained is as accurate and up-to-date as possible and welcomes feedback from the RTOs where information should be amended or updated. Prospective licence applicants should be aware that it is common that RTOs will notify the BSA that they are delivering a qualification which aligns with a licence class and wish to be included in this booklet, however, RTOs do not always notify the BSA when they have discontinued delivery of a qualification and therefore should be removed from the website.
Prospective licence applicants should also note that RTOs often choose to offer more than one type of delivery and training and assessment. For example, they could decide to deliver all modes (on-campus/face-to-face/lecture style of delivery, electronic/online/web delivery, Recognition of Prior Learning(RPL) or Upskilling/Gap training). Delivery could be via one mode only, or a combination of all and RTOs will often change their delivery modes depending on demand. The BSA therefore recommends that interested persons make their own enquiries to see if an RTO is delivering the qualification they seek, the cost, duration and the mode of delivery, in order to make the decision of which option suits them best.
Additional Information
Apprentices
Companies
Applying for an Additional Licence
Fit and Proper
|
|
|
|
|
